FAQs
FAQs List
Empty.
MagicQ > Art-Net Connection (Theatrical Mod)
Yes you can !
Just make sure to set it up correctly on your config.
You can follow the same steps as for the output of the first Universe but for more.
Make sure you have set it up correctly if still nothing re-check your Art-Net Outputs.
It should look something similar to this:
If still no output change the column «Unicast» of every Art-Net Output to Unicast and set up your Minecraft Computer IP.
After that go to: Setup > View Settings > Network.
Change the «Art-Net» type to «V4 Unicast«
There are two options for this:
- OPTION 1: Go to: Patch > Choose Dim/Media > Generic Dimmer
- OPTION 2: Create your own Dimm Fixture and Import it to MagicQ.
dot2 onPC > Art-Net Connection (Theatrical Mod)
Yes you can !
Unfortunatelly it only offers 1 free Universe for the onPC version (software only).
You can unlock all Art-Net Universes with Offical GrandMA Hardware.
This is a simple fix.
Allways open dot2 onPC as an Administrator.
If still after that it does not give you an IP when enabling Art-Net; go to: Setup > Network Interface and select the method you´re receiving internet to your computer.
If your connection is with an Ethernet Cable, select Ethenet, if it is with WiFi, then select your WiFi.
Then start a new session here: Setup > Sessions > Start a new session.
Select a slot and wait 5 seconds for it to apply.
After that go back to: Setup > Network Protocols and enable Art-Net Output.
QLC+ > Art-Net Connection (Theatrical Mod)
Empty
GrandMA 2/3 > Art-Net Connection (Theatrical Mod)
Yes you can !
Just make sure you have a official MA2/3 product for this as GrandMA only unlocks Art-Net Parameters on Official Products.
Yes but ONLY if you have GrandMA Official Hardware.
This could be from a Command Wing to MA Nodes or a GrandMA 2/3 Desk.
